VX 75/65 - 7.5 HP three-phase VORTEX electric pump for waste water
Flow rate up to 1500 l/min (90 m³/h). Head up to 24.8 m. 5.5 kW (7.5 HP) motor.
The VX 75/65 submersible electric pump from the VX series by Pedrollo is equipped with a vortex impeller which reduces the risk of clogging.
Suitable for pumping sewage with suspended solids, wastewater, rainwater, sewage, municipal sewage and industrial wastewater.
Recommended for civil and industrial installations, for installation in sewers, tunnels, excavations, canals and underground car parks.
The VX 75/65 can be installed up to 10 meters below the water level. For continuous operation, it requires a minimum immersion depth of 500 mm.
Made of stainless steel and cast iron of considerable thickness which provide greater strength and resistance to abrasion.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Current consumption at 400V (A)
- 12.7
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1500
- Min. head (m.)
- 5.5
- Max. head (m.)
- 24.8
- Cable length (m.)
- 10
- Jobs
- air conditioning systems
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 70
- Width (cm)
- 27.7
- Weight (Kg)
- 65
- Warranty (years)
- 2
VX 65 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VX 40/65

Bearings
| Pump side motor bearing | 6306 ZZ C3 |
| Opposite side engine bearing | 6304 ZZ C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | AR-27 |
| LM diameter | 27 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | AR-25 |
| LP diameter | 25 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
