VX 20/50-MF - 2 HP three-phase VORTEX sewage pump
Flow rate up to 750 l/min (45 m³/h). Head up to 13.5 m. 1.5 kW (2 HP) motor.
The Pedrollo VX 20/50-MF three-phase electric pump is recommended for draining flooded areas such as basements, underground car parks, car wash areas, for emptying cesspits and for disposing of sewage.
Designed to withstand adverse working conditions for the drainage of sewage in the domestic, civil and industrial sectors, in all cases where suspended solids are present in the water, for example water mixed with mud, groundwater, surface water.
Built entirely of stainless steel and characterised by particular resistance to corrosion and abrasion.
The geometry of the impeller and volute of the VX 20/50-MF allow for excellent performance which also translates into significant energy savings.
The vortex impeller allows the pumping of solids with a diameter of up to 50 millimetres and, thanks to its particular geometry, guarantees safe operation against clogging.
The flow rate ranges from 50 to 750 liters per minute. The head ranges from 2.5 to 13.5 meters.
It can be installed up to 5 meters below water level.
The supplied cable that Pedrollo provides for the VX 20/50-MF is 10 meters long.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 7.1
- Current consumption at 400V (A)
- 3.7
- Capacitor
- 25 µF 450 VL
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 650
- Min. head (m.)
- 2
- Max. head (m.)
- 11.5
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 44.7
- Weight (Kg)
- 15.4
- Warranty (years)
- 2
Construction data of the VX 15/35-MF

Bearings
| Pump side motor bearing | 6303 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4404 (AISI 316L) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
VX/50-MF Models and Performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



