TR 4 - 5.5 HP three-phase submersible electric pump with grinder
Flow rate up to 410 l/min (24.6 m³/h). Head up to 40 m. 4 Kw (5.5 HP) motor.
The three-phase TR 4 grinder pump by Pedrollo allows you to grind solids and liquids contained in water.
The fundamental characteristic of this pump is its construction.
Recommended for use in the domestic and industrial sectors.
The TR 4 has a pump body made of cast iron of considerable thickness and a grinder made of high-resistance tempered stainless steel which allows for the complete grinding of solid bodies and fibres contained in waste water and effluent in the domestic and civil sectors, for conveyance under pressure into the sewer system through small diameter pipes.
It must be powered by a three-phase voltage, has a horsepower of 4 HP and the temperature of the liquid to be pumped reaches up to +40 degrees centigrade.
The TR 4 pump can be used up to 10 metres below water level, with the relevant H07 RN-F cable supplied.
It has a flow rate that varies from 20 to 410 litres per minute with a head of 2 to 40 metres.
It can be used with various coupling kits supplied by Pedrollo .
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Current consumption at 400V (A)
- 7.5
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 410
- Min. head (m.)
- 2
- Max. head (m.)
- 40
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 48
- Width (cm)
- 25.6
- Depth (cm)
- 32.9
- Weight (Kg)
- 54
- Warranty (years)
- 2
Construction data TR 3-4
Models and performance TR 3-4
TR 3-4 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
