-42%

TOP 2 - VORTEX/GM (5m) - 0.50 HP electric drainage pump for dirty water

Flow rate up to 155 l/min (10.8 m³/h). Head up to 7.6 m. 0.37 kW (0.5 HP) motor. 5-meter cable with Schuko plug.

€154.96 Tax included

127.02 Tax excluded

€267.18-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

TOP 2 - VORTEX/GM (5m) - 0.50 HP electric drainage pump for dirty water
  • Use dot instead of comma

Loading

Description

The TOP 2 - VORTEX submersible electric pump from the TOP-VORTEX series by Pedrollo is recommended for domestic installations.

Suitable for evacuating waste water, emptying tanks, domestic drains, emptying collection pits even in the presence of suspended solids up to 25 millimetres in diameter.

The construction solutions used by Pedrollo for the TOP 2 - VORTEX guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.

The vertical sliding magnetic float makes it ideal for small wells.

It can be installed up to 3 meters below the water level.

The electric pump is complete with a 5-meter power cable and a float switch.

Data sheet
Brand Pedrollo
Reference TOP 2 - VORTEX/GM 5MT
In stock 23 Items
Motor connection
SINGLE-PHASE
Power (Kw)
0.37
Power (HP)
0.50
Absorption at 230V (A)
2
Capacitor
10 µF 450 VL
Delivery mouth
1" 1/4
Pump body
Technopolymer
Impeller
Technopolymer
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
20
Max. flow rate (l./min.)
150
Min. head (m.)
2
Max. head (m.)
7.6
Cable length (m.)
10
Jobs
drainage
drying up
Max. liquid temperature (°C)
+40°C
Height (cm)
28.8
Width (cm)
15.2
Weight (Kg)
5.4
Warranty (years)
2
Attachments

TOP-VORTEX data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo TOP-VORTEX series pumps.

Download (1.21MB)

TOP models and performances - VORTEX/GM

GUY
single phase
TOP 2 - VORTEX/GM
TOP 3 - VORTEX/GM
POWER
KWHP
0.370.50
0.550.75

Construction data of the TOP 2 VORTEX

Cutaway TOP pumps
Bearings
Pump side motor bearing6201 ZZ
Opposite side engine bearing6201 ZZ
Tree holding
Type of sealDouble Seal: Mechanical and Lip with oil chamber
Engine side modelLip seal
LM diameter12
LM elastomerNBR
Shrinkage DN1=450 DN2=350STA-12R
LP diameter12
LP fixed ringCeramic
LP rotating ringGraphite
LP elastomerNBR
Materials
1.0 - Pump bodyReinforced technopolymer
2.2 - Suction coverReinforced technopolymer
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterReinforced technopolymer