HT 10/9 - 5.5 HP three-phase vertical multistage electric pump
Flow rate up to 250 l/min (12 m³/h). Head up to 139 m. Motor 4 Kw (5.5 HP).
The HT 10/9 multi-impeller centrifugal electric pump by Pedrollo is ideal for use in domestic, civil and agricultural fields.
This electric pump is designed to ensure high performance in a silent way thanks to the 3 stainless steel impellers.
The HT 10/9 stands out for its great silence.
It can also be used for water distribution in conjunction with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 38.5 to 139 meters.
The HT 10/9 must be powered by a three-phase voltage, has a horsepower of 5.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of AISI 304 stainless steel and cast iron which guarantee the pump compactness but above all resistance and robustness.
With the multi-stage construction, the operating noise is particularly low.
The HT 10/9 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Absorption at 230V (A)
- 15.6
- Current consumption at 400V (A)
- 9
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 30
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 38.5
- Max. head (m.)
- 139
- Jobs
- fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 71.6
- Width (cm)
- 28
- Depth (cm)
- 25.7
- Weight (Kg)
- 53.8
- Warranty (years)
- 2
Construction data of the HT 5/6

Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |



