HF 70A - 3 HP three-phase centrifugal electric pump
Description
The Pedrollo HF 70A centrifugal electric pump is recommended for use in the agricultural and industrial fields.
Suitable for surface and sprinkler irrigation, for drawing water from lakes, rivers and wells.
It satisfies the needs of those who require a high flow rate at the expense of a low head.
The flow rate ranges from 50 to 300 litres per minute while the head ranges from 25 to 39 metres.
Made from the highest quality AISI 304 and 431 stainless steel and cast iron, the HF 70A boasts a solid and robust construction built to last over time.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 9.5
- Current consumption at 400V (A)
- 5.5
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 300
- Min. head (m.)
- 25
- Max. head (m.)
- 39
- Jobs
- cooling systems
irrigation
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 26.9
- Width (cm)
- 39.3
- Depth (cm)
- 21.6
- Weight (Kg)
- 24.2
- Warranty (years)
- 2
HF models and performances - Medium ranges
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 70C-70B-70A-5 BM-5 AM

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



