CP 220AH - 7.5 HP three-phase centrifugal electric pump
Flow rate up to 600 l/min (36 m³/h). Head up to 54.5 m. 5.5 kW (7.5 HP) motor.
The CP 220AH electric pump from Pedrollo 's CP series is simple and reliable.
Robustly constructed, the electric pump is made from materials such as cast iron and stainless steel to ensure strength and durability.
Installation is recommended indoors or in places protected from the elements.
The flow rate ranges from 50 to a maximum of 450 liters per minute and the range from 42 to 52 meters.
The maximum pressure supported by the pump body is 10 bar .
The CP 220AH is recommended for residential, agricultural, and industrial use. It is particularly suited for water supply, air conditioning and cooling systems, and irrigation.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Absorption at 230V (A)
- 20
- Current consumption at 400V (A)
- 11.5
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 600
- Min. head (m.)
- 25
- Max. head (m.)
- 49
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 32.8
- Width (cm)
- 50.5
- Depth (cm)
- 25
- Weight (Kg)
- 47.8
- Warranty (years)
- 2
CP 220 models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 220A-220AH-230C-230B-A

Bearings
| Pump side motor bearing | 6206 ZZ - C3 |
| Opposite side motor bearing | 6205 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



