WR 65/125A - 5.5 HP three-phase centrifugal electric pump
The Pedrollo WR 65/125A centrifugal electric pump is recommended for use in the agricultural, civil and industrial sectors.
This pump is suitable for handling clean water, without abrasive parts, or liquids that are chemically non-aggressive for the materials from which the pump is made.
The WR 65/125A can be used in heating, air conditioning, cooling and circulation systems.
It has a flow rate that varies from 300 to 1200 litres per minute with a head of 13 to 23.5 metres.
The WR 65/125A must be powered by a three-phase voltage, has a horsepower of 5.5 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +110.
The manometric suction capacity reaches up to 7 metres.
The pump body is made of cast iron, while the impeller and motor shaft are made of stainless steel. These materials ensure the WR 65/125A pump is robust, durable, and long-lasting.
Installation must be carried out in well-ventilated, closed areas or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 550
- Min. head (m.)
- 6
- Max. head (m.)
- 16
- Jobs
- air conditioning systems
irrigation - Max. liquid temperature (°C)
- +110°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 43.2
- Width (cm)
- 34
- Depth (cm)
- 22
- Weight (Kg)
- 29
- Warranty (years)
- 2



