VXC 20/50 - 2 HP three-phase VORTEX electric sewage pump
Flow rate up to 700 l/min (42 m³/h). Head up to 13.5 m. 1.5 kW (2 HP) motor.
Description
The VXC 20/50 submersible electric pump from the VXC series by Pedrollo is reliable even in extreme working situations.
It stands out for its use in the production of high-quality materials.
The use of thick cast iron provides strength and abrasion resistance, allowing the electric pump to last over time.
The VXC 20/50 is equipped with a vortex impeller which makes it suitable for draining water containing suspended solids with a diameter of 50 millimetres.
The supplied cable is 10 meters long.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Current consumption at 400V (A)
- 3.7
- Delivery mouth
- 2" 1/2
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 50
- Crankshaft
- AISI 431 stainless steel
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 700
- Min. head (m.)
- 2.5
- Max. head (m.)
- 13.5
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 48.7
- Width (cm)
- 33.1
- Depth (cm)
- 24.2
- Weight (Kg)
- 42
- Warranty (years)
- 2
VXC 50 Models and Performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXC 50 - 65 series

Bearings
| Pump side motor bearing | 6305 CM D 6 |
| Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-22 |
| LM diameter | 22 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-20 |
| LP diameter | 20 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |



