VXC 15/45 - 1.5 HP three-phase VORTEX electric sewage pump
Flow rate up to 650 l/min (39 m³/h). Head up to 11.5 m. 1.1 Kw (1.5 HP) motor.
Description
The VXC 15/45 submersible electric pump from the VXC series by Pedrollo stands out for its reliability and performance.
Recommended for domestic and civil installations.
Suitable for draining water containing suspended solids, sewage, wastewater and water mixed with sludge.
Pedrollo focused on construction for the VXC 15/45. The use of thick cast iron provides strength and solidity.
It can be installed up to 10 meters below the water level. For continuous operation, it requires a depth of 305 mm.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Current consumption at 400V (A)
- 3
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 45
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 650
- Min. head (m.)
- 2
- Max. head (m.)
- 11.5
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
water supply - Max. liquid temperature (°C)
- 40
- Height (cm)
- 42.8
- Width (cm)
- 25.0
- Depth (cm)
- 20.0
- Weight (Kg)
- 18.9
- Warranty (years)
- 2
VXC 35-45 models and performances
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXC series

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |



