VXC 40/50 - 4 HP three-phase VORTEX electric sewage pump
The Pedrollo VXC 40/50 electric pump for waste water is recommended for use in the civil and industrial sectors.
Suitable for draining sewage, sewage, wastewater, water mixed with sludge, and reactivated and putrid sludge. Suitable for installation in sewers, tunnels, excavations, canals, and underground parking lots.
Pedrollo designed and built this electric pump with performance and reliability in mind.
The VXC 40/50 is made of premium materials. The use of thick cast iron makes the pump robust, abrasion-resistant, and long-lasting.
It can be installed up to 10 meters underwater and works even if it is completely uncovered.
A 10-meter cable is also supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Current consumption at 400V (A)
- 5
- Delivery mouth
- 2" 1/2
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 50
- Crankshaft
- AISI 431 stainless steel
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 850
- Min. head (m.)
- 2.5
- Max. head (m.)
- 16.5
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 48.7
- Width (cm)
- 36
- Depth (cm)
- 24.6
- Weight (Kg)
- 43
- Warranty (years)
- 2
VXC 50 Models and Performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXC 50 - 65 series

Bearings
| Pump side motor bearing | 6305 CM D 6 |
| Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-22 |
| LM diameter | 22 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-20 |
| LP diameter | 20 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
