VX 55/65 - 5.5 HP three-phase VORTEX electric pump for waste water
Flow rate up to 1350 l/min (81 m³/h). Head up to 20.7 m. 4 kW (5.5 HP) motor.
Description
The VX 55/65 submersible electric pump from the VX series by Pedrollo is recommended for draining water with solids up to 65 millimetres in diameter.
Suitable for installation in sewers, tunnels, excavations, canals and underground car parks.
The vortex impeller, with which it is equipped, reduces the risk of clogging and contributes to the reliability of the electric pump.
The VX 55/65 guarantees high performance and reliable operation over a long period of time.
The supplied cable is 10 meters long.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Current consumption at 400V (A)
- 7.7
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1350
- Min. head (m.)
- 3.7
- Max. head (m.)
- 20.7
- Cable length (m.)
- 10
- Jobs
- air conditioning systems
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 67
- Width (cm)
- 27.7
- Weight (Kg)
- 60
- Warranty (years)
- 2
VX 65 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VX 40/65

Bearings
| Pump side motor bearing | 6306 ZZ C3 |
| Opposite side engine bearing | 6304 ZZ C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | AR-27 |
| LM diameter | 27 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | AR-25 |
| LP diameter | 25 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



