VX 55/50 - 5.5 HP three-phase VORTEX electric pump for waste water
Flow rate up to 1000 l/min (60 m³/h). Head up to 22 m. 4 kW (5.5 HP) motor.
Description
The VX 55/50 submersible electric pump from the VX series by Pedrollo guarantees reliable operation over a long period of time.
Built in stainless steel and cast iron of considerable thickness which give the electric pump exceptional robustness and resistance to abrasion.
Equipped with a vortex impeller that minimizes the risk of clogging.
The VX 55/50 allows the passage of suspended solids of 50 millimetres in diameter.
The supplied power cable is 10 meters long.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Current consumption at 400V (A)
- 7
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 1000
- Min. head (m.)
- 6.5
- Max. head (m.)
- 25
- Cable length (m.)
- 10
- Jobs
- air conditioning systems
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 64.2
- Width (cm)
- 27.6
- Weight (Kg)
- 59.0
- Warranty (years)
- 2
VX 50 models and performances
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VX40/50

Bearings
| Pump side motor bearing | 6306 ZZ C3 |
| Opposite side engine bearing | 6304 ZZ C3 |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 25 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | ED560-25 |
| LP diameter | 25 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



