VXm 10/50 (5m) - 1 HP single-phase VORTEX electric pump for waste water
Flow rate up to 550 l/min (33 m³/h). Head up to 9 m. 0.75 kW (1 HP) motor. 5 m cable with Schuko plug.
The VXm 10/50 submersible electric pump from Pedrollo 's VX series is the right choice when working conditions and required performance become demanding.
Recommended for the drainage of groundwater, surface water, sewage and wastewater.
Suitable for activities such as draining flooded areas such as basements, underground car parks, car wash areas, for domestic drains, emptying cesspits and disposing of sewage.
The VXm 10/50 is equipped with a vortex impeller which allows the pumping of solids with a diameter of up to 50 millimetres.
The supplied cable is 5 meters long.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5
- Capacitor
- 20 µF 450 VL
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 550
- Min. head (m.)
- 1.5
- Max. head (m.)
- 9
- Cable length (m.)
- 5
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 43.1
- Width (cm)
- 24.3
- Weight (Kg)
- 14.3
- Warranty (years)
- 2
Construction data of the VX50 series

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
VXm/50 Models and Performance
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



