VX 8/50 (10m) - 0.75 HP three-phase VORTEX electric pump for waste water
Flow rate up to 450 l/min (27 m³/h). Head up to 6.5 m. 0.55 kW (0.75 HP) motor. 10 m cable.
The VX 8/50 submersible electric pump from the Pedrollo VX series is equipped with a vortex impeller.
Suitable for the drainage of groundwater, surface water, sewage and loaded water containing solids and suspended matter up to 50 millimetres in diameter.
Suitable for domestic, civil and industrial installations.
Recommended for draining flooded areas such as basements, underground car parks, car wash areas, for domestic wastewater, emptying cesspits and disposing of sewage.
The VX 8/50 is solid and robust. Pedrollo has crafted the electric pump from cast iron and stainless steel for long-lasting results.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Current consumption at 400V (A)
- 1.8
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 450
- Min. head (m.)
- 1.5
- Max. head (m.)
- 6.5
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 43.1
- Width (cm)
- 24.3
- Weight (Kg)
- 13.1
- Warranty (years)
- 2
Construction data of the VX50 series

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
VX/50 Models and Performance
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



