VXm 8/50 (5m) - 0.75 HP single-phase VORTEX electric pump for waste water
Flow rate up to 450 l/min (27 m³/h). Head up to 6.5 m. 0.55 kW (0.75 HP) motor. 5 m cable with Schuko plug.
The VXm 8/50 submersible electric pump from Pedrollo 's VX series is recommended wherever suspended solids up to 50 millimetres in diameter are present in the water.
It stands out for its reliability, especially in fixed, automatic installations.
The vortex impeller, thanks to its particular geometry, guarantees safe operation against clogging.
It can be installed up to 5 meters below the water level. For continuous operation, it requires an immersion depth of 290 mm.
When working conditions and required performance become demanding, the VXm 8/50 is the right choice.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.7
- Capacitor
- 20 µF 450 VL
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 450
- Min. head (m.)
- 1.5
- Max. head (m.)
- 6.5
- Cable length (m.)
- 5
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 43.2
- Width (cm)
- 24.3
- Weight (Kg)
- 13.3
- Warranty (years)
- 2
Construction data of the VX50 series

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
VXm/50 Models and Performance
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



