VX 55/80 - 5.5 HP three-phase VORTEX electric pump for waste water
Flow rate up to 1400 l/min (84 m³/h). Head up to 16.5 m. 4 kW (5.5 HP) motor.
The Pedrollo VX 55/80 Vortex impeller electric pump is designed and built to guarantee operation and performance over a long period of time.
The Vortex impeller is particularly recommended for its operational reliability and low risk of clogging.
The VX 55/80 electric pump is suitable for installation in sewers, tunnels, excavations, canals, and underground parking lots. It is recommended for pumping sewage containing suspended solids, wastewater, rainwater, sewage, municipal sewage, and industrial wastewater.
The flow rate ranges from 200 to 1400 litres per hour and the head ranges from 4 to 16.5 metres.
The pump can be installed up to 10 meters below the water level.
The VX 55/80 electric pump is solidly constructed. Constructed of stainless steel and thick cast iron for strength and durability.
The 10 meter cable is also supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Current consumption at 400V (A)
- 6.2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 2.5
- Max. head (m.)
- 17
- Cable length (m.)
- 10
- Jobs
- air conditioning systems
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 63
- Width (cm)
- 27.7
- Depth (cm)
- 21.0
- Weight (Kg)
- 53.3
- Warranty (years)
- 2
Construction data of the VX 40/65

Bearings
| Pump side motor bearing | 6306 ZZ C3 |
| Opposite side engine bearing | 6304 ZZ C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | AR-27 |
| LM diameter | 27 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | AR-25 |
| LP diameter | 25 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
VX 80 Models and Performance
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
