VX 40/80 - 4 HP three-phase VORTEX electric pump for waste water
Flow rate up to 1200 l/min (72 m³/h). Head up to 12.5 m. 3 kW (4 HP) motor.
The Pedrollo VX 40/80 Vortex impeller electric pump is suitable for installation in sewers, tunnels, excavations, canals and underground car parks.
Pedrollo has designed and manufactured this pump with the aim of guaranteeing long-term operation and performance.
The VX 40/80 electric pump is equipped with a Vortex impeller recommended for operational reliability and low risk of clogging.
Suitable for pumping sewage with suspended solids, waste water, rain water, sewage, municipal sewage, industrial waste water.
The flow rate ranges from 200 to 1200 litres per hour and the head ranges from 3 to 12.5 metres.
The pump can be installed up to 10 meters below the water level.
The VX 40/80 electric pump is built in stainless steel and cast iron of considerable thickness to promote resistance and guarantee durability over time.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Current consumption at 400V (A)
- 6.2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 2.5
- Max. head (m.)
- 17
- Cable length (m.)
- 10
- Jobs
- air conditioning systems
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 63
- Width (cm)
- 27.7
- Depth (cm)
- 21.0
- Weight (Kg)
- 53.3
- Warranty (years)
- 2
Construction data of the VX 40/65

Bearings
| Pump side motor bearing | 6306 ZZ C3 |
| Opposite side engine bearing | 6304 ZZ C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | AR-27 |
| LM diameter | 27 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | AR-25 |
| LP diameter | 25 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
VX 80 Models and Performance
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



