VX 15/50-ST - 1.5 HP three-phase VORTEX electric sewage pump
Flow rate up to 650 l/min (39 m³/h). Head up to 13.5 m. 1.1 Kw (1.5 HP) motor.
The VX 15/50-ST submersible electric pump from the VX-ST series by Pedrollo is characterised by particular resistance to corrosion and abrasion.
Made entirely of stainless steel which guarantees strength, resistance and long-lasting operation.
Pedrollo has studied various construction solutions that make the VX 15/50-ST electric pump powerful, highly efficient but also reliable.
The VORTEX impeller allows the pumping of solids up to 40 millimetres and, thanks to its particular design, guarantees safe operation against clogging.
The hydraulic geometry of the volute and impeller allows for high performance, high efficiency which translates into significant energy savings.
- Motor connection
- THREE-PHASE
- Power (HP)
- 1.5
- Current consumption at 400V (A)
- 3
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 650
- Min. head (m.)
- 2
- Max. head (m.)
- 13.5
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 44.7
- Weight (Kg)
- 12.1
- Warranty (years)
- 2
Construction data of the VX 15/35-ST

Bearings
| Pump side motor bearing | 6203 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 2.0 - Lid | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



