-42%

VXm 10/35-MF - 1 HP single-phase VORTEX sewage pump

Flow rate up to 400 l/min (24 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor.

€505.23 Tax included

414.12 Tax excluded

€871.08-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

VXm 10/35-MF - 1 HP single-phase VORTEX sewage pump
  • Use dot instead of comma

Loading

Description

The VXm 10/35-MF submersible electric pump from the VX-MF series by Pedrollo is characterised by particular resistance to corrosion and abrasion.

Pedrollo has made the electric pump entirely of stainless steel for greater resistance and solidity.

The capabilities of the VXm 10/35-MF are evident in extreme working situations.

The vortex impeller allows the pumping of solids with a diameter of up to 50 millimetres and ensures safe operation against clogging.

It can be installed up to 5 meters below water level.

Data sheet
Brand Pedrollo
Reference VXm 10/35-MF
In stock 10 Items
MPN 48SGV92B0A1U
Motor connection
SINGLE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
4.8
Capacitor
20 µF 450 VL
Delivery mouth
1" 1/2
Pump body
AISI 304 stainless steel
Impeller
AISI 304 stainless steel
Number of impellers
1
Crankshaft
AISI 304 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
50
Max. flow rate (l./min.)
400
Min. head (m.)
2
Max. head (m.)
11
Cable length (m.)
10
Jobs
drainage
drying up
slightly dirty waters
Max. liquid temperature (°C)
+40°C
Height (cm)
41
Weight (Kg)
13.6
Warranty (years)
2
Attachments

VX-MF data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo VX-MF series pumps.

Download (1.29MB)

VXm/35-MF models and performances

GUY
single phase
VXm 8/35-MF
VXm 10/35-MF
VXm 15/35-MF
VXm 20/35-MF
POWER
KWHP
0.550.75
0.751
1.11.5
1.52

Construction data of the VX-MF series

VX-MF cutaway
Bearings
Pump side motor bearing6203 ZZ
Opposite side engine bearing6203 ZZ
Tree holding
Type of sealDouble mechanical seal in oil chamber
LM diameter14
LM fixed ringSilicon carbide
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350MG1-14D SIC
LP diameter14
LP fixed ringSilicon carbide
LP rotating ringSilicon carbide
LP elastomerNBR
Materials
1.0 - Pump bodyStainless steel EN 1.4404 (AISI 316L)
1.4 - BasicStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4404 (AISI 316L)
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
7.0 - LanternStainless steel EN 1.4301 (AISI 304)