-42%

UPm 8/4 (10m) - 2 HP single-phase submersible electric pump

Flow rate up to 180 l/min (10.8 m³/h). Head up to 54 m. 1.5 kW (2 HP) motor. 10 m cable.

€425.27 Tax included

348.58 Tax excluded

€733.22-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

UPm 8/4 (10m) - 2 HP single-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The UPm 8/4 submersible electric pump from Pedrollo 's UP series boasts a solid and robust construction thanks to the use of stainless steel.

It stands out for its great reliability which makes it perfect for installations in the domestic sector.

The implemented technical solutions prevent the electric pump from blocking even after long periods of inactivity.

The UPm 8/4 is particularly suitable for activities such as water distribution in conjunction with pressure tanks, for the irrigation of vegetable gardens and gardens and for pressure boosting.

It can be installed both vertically and horizontally up to 20 metres below water level.

Data sheet
Brand Pedrollo
Reference UPm 8/4 10m
In stock 9 Items
MPN 48SP0175A1U
Motor connection
SINGLE-PHASE
Power (HP)
2
Absorption at 230V (A)
8.5
Capacitor
35 µF 450 VL
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
Noryl
Number of impellers
4
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
40
Max. flow rate (l./min.)
180
Min. head (m.)
12
Max. head (m.)
54
Cable length (m.)
10
Jobs
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+40°C
Height (cm)
50.2
External diameter (cm)
15
Weight (Kg)
17
Warranty (years)
2

UPm models and performance

TYPE
three phase
UPm 2/2
UPm 2/3
UPm 2/4
UPm 2/5
UPm 2/6
UPm 4/3
UPm 4/4
UPm 4/5
UPm 4/6
UPm 8/3
UPm 8/4
POWER
KWHP
0.370.50
0.550.75
0.751
1.11.5
1.52
0.550.75
0.751
1.11.5
1.52
1.11.5
1.52

Construction data UP2

Cutaway of UP pumps
Bearings
Pump side motor bearing6303 2RS - C3
Opposite side engine bearing6203 ZZ - C3E
Tree holding
Type of sealDouble mechanical seal in oil chamber
Engine side modelSTA-17
LM diameter17
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350ST1-16
LP diameter16
LP fixed ringSilicon carbide
LP rotating ringGraphite
LP elastomerNBR
Materials
2.1 - Seal holder coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)