-42%

UPm 2/2-GE (10m) - Single-phase submersible electric pump with float switch, 0.50 HP

Flow rate up to 80 l/min (4.8 m³/h). Head up to 33 m. 0.37 kW (0.50 HP) motor. 10 m cable.

€363.00 Tax included

297.54 Tax excluded

€625.86-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

UPm 2/2-GE (10m) - Single-phase submersible electric pump with float switch, 0.50 HP
  • Use dot instead of comma

Loading

Description

The UPm 2/2-GE submersible electric pump from the UP series by Pedrollo can pump clean water and liquids that are chemically non-aggressive for the components.

Recommended for domestic installations due to its great reliability but can also be applied in civil and agricultural applications.

Thanks to the implemented technical solutions, the UPm 2/2-GE does not lock out even after long periods of inactivity.

It can be installed up to 20 meters below water level with an adequately long power cable.

Installation can be done both vertically and horizontally.

Data sheet
Brand Pedrollo
Reference UPm 2/2-GE 10m
In stock 19 Items
MPN 48SP2110A1U
Motor connection
SINGLE-PHASE
Power (Kw)
0.37
Power (HP)
0.50
Absorption at 230V (A)
4.4
Capacitor
16 µF 450 VL
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
Noryl
Number of impellers
2
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
10
Max. flow rate (l./min.)
80
Min. head (m.)
16.4
Max. head (m.)
33
Cable length (m.)
10
Jobs
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+40°C
Height (cm)
39.8
External diameter (cm)
15
Weight (Kg)
12.8
Warranty (years)
2
Attachments

UP technical sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo UP series pumps.

Download (2.03MB)

GE UPm models and performance

TYPE
three phase
UPm 2/2-GE
UPm 2/3-GE
UPm 2/4-GE
UPm 2/5-GE
UPm 2/6-GE
UPm 4/3-GE
UPm 4/4-GE
UPm 4/5-GE
UPm 4/6-GE
UPm 8/3-GE
UPm 8/4-GE
POWER
KWHP
0.370.50
0.550.75
0.751
1.11.5
1.52
0.550.75
0.751
1.11.5
1.52
1.11.5
1.52

Construction data UP2

Cutaway of UP pumps
Bearings
Pump side motor bearing6303 2RS - C3
Opposite side engine bearing6203 ZZ - C3E
Tree holding
Type of sealDouble mechanical seal in oil chamber
Engine side modelSTA-17
LM diameter17
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350ST1-16
LP diameter16
LP fixed ringSilicon carbide
LP rotating ringGraphite
LP elastomerNBR
Materials
2.1 - Seal holder coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)