TIGm 0.55 - Submersible electric pump with single-phase grinder 0.75 HP
Flow rate up to 130 l/min (7.2 m³/h). Head up to 16 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo TIGm 0.55 single-phase grinder pump is ideal for working safely when working conditions become challenging.
The TIGm 0.55 pump of the TRITUS-INOX series is equipped with a high-tempered stainless steel grinder that allows for the complete grinding of solid bodies and fibres contained in waste water and waste water in the domestic and civil sectors, for conveying under pressure into the sewer system through small diameter pipes.
The maximum flow rate is 130 litres per minute and the head is up to 16 metres.
The pump is equipped with a 10 meter cable, it can be immersed up to 5 meters underwater.
It has an IP68 certification which is safe from dust and water ingress.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 4.5
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 130
- Min. head (m.)
- 2
- Max. head (m.)
- 16
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 39.8
- Width (cm)
- 17.7
- Depth (cm)
- 23.2
- Weight (Kg)
- 15.9
- Warranty (years)
- 2
TIGm models and performances
TIGm construction data
Construction

Bearings
| Pump side motor bearing | 6303 2RS-C3 |
| Opposite side engine bearing | 6203 ZZ-C3E |
Tree seal
| Type of seal | Double Mechanical Seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon Carbide |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon Carbide |
| LP Rotating Ring | Silicon Carbide |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Technopolymer |
| 3.2 - Shredder | Stainless steel EN 1.4125 (AISI 440C) hardened |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
