TRm 1.5 - 2 HP single-phase submersible electric pump with grinder
Description
The TRm 1.5 submersible electric pump from the Tritus series by Pedrollo is made entirely of cast iron.
Extremely durable, it resists abrasion and lasts over time even in extreme working conditions.
Recommended for domestic and industrial installations for pressurized conveyance into the sewer system through small diameter pipes.
The TRm 1.5 is suitable for draining wastewater and wastewater containing solids and fibres.
It can be installed up to 10 meters below the water level. For continuous operation, a minimum immersion depth of 300 mm is required.
Data sheet
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 10
- Capacitor
- 50 µF 450 VL
- Delivery mouth
- 1/2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 270
- Min. head (m.)
- 2
- Max. head (m.)
- 26
- Cable length (m.)
- 10
- Jobs
- slightly dirty waters
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 48.9
- Weight (Kg)
- 45.5
- Warranty (years)
- 2
TRm models and performances
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
