TIGm 1.3 - 1.75 HP single-phase submersible electric pump with grinder
Flow rate up to 250 l/min (15 m³/h). Head up to 21 m. 1.3 kW (1.75 HP) motor.
The Pedrollo TIGm 1.3 single-phase grinder pump is equipped with a high-resistance tempered stainless steel grinder.
The pump is equipped with a 10-meter cable, it can be immersed up to 5 meters underwater.
The TIGm 1.3 allows for the complete shredding of solid bodies and fibres contained in wastewater and wastewater in the domestic and civil sectors, for conveyance under pressure into the sewer system through small diameter pipes.
It has a flow rate that varies from 20 to 250 litres per minute with a head from 2 to 21 metres.
It must be powered by a single-phase voltage, has a horsepower of 1.75 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
It has an IP68 certification, safe from dust and water ingress.
The TIGm 1.3 is equipped with an external control panel for greater operational safety thanks to a special capacitor that significantly increases torque. The control panel includes a manually resettable motor circuit breaker.
The pump is made of materials such as cast iron and stainless steel which give the pump good resistance and allow it to last over time.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.3
- Power (HP)
- 1.75
- Absorption at 230V (A)
- 6.7
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 150
- Min. head (m.)
- 2
- Max. head (m.)
- 24
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 43.2
- Width (cm)
- 19.5
- Depth (cm)
- 24.0
- Weight (Kg)
- 18.3
- Warranty (years)
- 2



