TR 6 - 8 HP single-phase submersible electric pump with grinder
The TR 6 grinder pump from Pedrollo stands out for its robust construction.
Made entirely of cast iron of considerable thickness, it is resistant to abrasion and allows it to last over time.
The TR 6 is equipped with a high-resistance, tempered stainless steel shredder that allows for the complete shredding of solids and fibres contained in waste water.
Recommended for use in the domestic and industrial sectors for pressurized conveyance into the sewer system through small diameter pipes.
The flow rate ranges from 20 to 305 litres per hour and the head ranges from 2 to 44.5 metres.
The pump can be installed up to 10 meters below the water level.
The TR 6 also comes with a 10-meter cable.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 6
- Power (HP)
- 8
- Current consumption at 400V (A)
- 7.5
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 410
- Min. head (m.)
- 2
- Max. head (m.)
- 40
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 48.0
- Width (cm)
- 25.6
- Depth (cm)
- 32.9
- Weight (Kg)
- 54
- Warranty (years)
- 2
TR 5-6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
