TR 5 - 6.7 HP single-phase submersible electric pump with grinder
Flow rate up to 420 l/min (25.2 m³/h). Head up to 47 m. 5 kW (6.7 HP) motor.
The Pedrollo TR 5 grinder pump is particularly suitable for pressurized conveyance in the sewer system through small diameter pipes.
Recommended for use in the domestic and industrial sectors.
The shredder made of high-strength tempered stainless steel allows for the complete shredding of solid bodies and fibres contained in waste water.
The TR 5 stands out for its robust construction. Made of thick cast iron, it is abrasion-resistant and built to last.
The flow rate ranges from 20 to 410 litres per hour and the head ranges from 2 to 47 metres.
The pump can be installed up to 10 meters below the water level.
The TR 5 also comes with a 10-meter cable.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5
- Power (HP)
- 6.7
- Current consumption at 400V (A)
- 7.5
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 410
- Min. head (m.)
- 2
- Max. head (m.)
- 40
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 48.0
- Width (cm)
- 25.6
- Depth (cm)
- 32.9
- Weight (Kg)
- 54
- Warranty (years)
- 2
TR 5-6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



