-42%

TOP 3 - FLOOR (10m) - 0.75 HP clear water drainage pump

Flow rate up to 170 l/min (10.2 m³/h). Head up to 10.4 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug.

€166.29 Tax included

136.3 Tax excluded

€286.70-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

TOP 3 - FLOOR (10m) - 0.75 HP clear water drainage pump
  • Use dot instead of comma

Loading

Description

The TOP 3-FLOOR submersible electric pump by Pedrollo is recommended for the domestic sector.

Suitable for draining clear water without abrasive particles.

The TOP 3-FLOOR, thanks to its ability to suck water up to 2 millimetres from the bottom, this electric pump is suitable for emergency domestic use in small flooded areas and in all those applications where maximum levels of drainage are required.

The electric pump is complete with a 5-meter power cable and can be used up to 3 meters below the water level.

The flow rate ranges from 20 to 170 liters per minute. The head ranges from 2.6 to 10.4 meters.

It must be powered by a single-phase voltage, has a horsepower of 0.75 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +40.

The construction of the TOP 3-FLOOR is solid and robust as Pedrollo has used stainless steel which allows it to last over time.

Data sheet
Brand Pedrollo
Reference TOP 3 - FLOOR 10MT
In stock 50 Items
MPN 48TOPF13A1
Motor connection
SINGLE-PHASE
Power (Kw)
0.55
Power (HP)
0.75
Absorption at 230V (A)
3.1
Delivery mouth
1" 1/4
Pump body
Technopolymer
Impeller
Noryl
Number of impellers
1
Crankshaft
Stainless steel EN 10088-3 1.4104
Check valve
Yes
Degree of protection
IP 68
Minimum flow rate (l./min.)
20
Max. flow rate (l./min.)
170
Min. head (m.)
2.6
Max. head (m.)
10.4
Cable length (m.)
10
Jobs
drainage
drying up
Max. liquid temperature (°C)
+40°C
Height (cm)
28.7
Width (cm)
15.2
Depth (cm)
15.2
Weight (Kg)
6.6
Warranty (years)
2
Attachments

TOP-FLOOR technical sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo TOP-FLOOR series pumps.

Download (1.24MB)

TOP models and performances - FLOOR

TYPE
single phase
TOP 1 - FLOOR
TOP 2 - FLOOR
POWER
KWHP
0.250.33
0.370.50

Construction data of the TOP series

TOP pump cutaway
Bearings
Pump side motor bearing6201 ZZ
Opposite side engine bearing6201 ZZ
Tree holding
Type of sealDouble Seal: Mechanical and Lip with oil chamber
Engine side modelLip seal
LM diameter12
LM elastomerNBR
Shrinkage DN1=450 DN2=350STA-12R
LP diameter12
LP fixed ringCeramic
LP rotating ringGraphite
LP elastomerNBR
Materials
1.0 - Pump bodyReinforced technopolymer
2.2 - Suction coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterReinforced technopolymer