-42%

TOP 1 - FLOOR (10m) - 0.33 HP clear water drainage pump

Flow rate up to 120 l/min (7.2 m³/h). Head up to 6.5 m. 0.25 kW (0.33 HP) motor. 10-meter cable with Schuko plug.

€142.94 Tax included

117.16 Tax excluded

€246.44-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

TOP 1 - FLOOR (10m) - 0.33 HP clear water drainage pump
  • Use dot instead of comma

Loading

Description

The TOP 1 - FLOOR submersible electric pump from the TOP-FLOOR series by Pedrollo is recommended for draining flooded areas up to 2 millimetres from the bottom.

Suitable for draining clear water without abrasive particles.

Suitable for emergency domestic use in small flooded areas and in all situations where maximum drainage levels are required.

The TOP 1 - FLOOR can be installed up to 3 meters below the water level.

Allows the passage of suspended solids up to 2 millimetres in diameter.

Data sheet
Brand Pedrollo
Reference TOP 1 - FLOOR 10MT
In stock 10 Items
Motor connection
SINGLE-PHASE
Power (HP)
0.33
Absorption at 230V (A)
1.5
Capacitor
10 µF 450 VL
Delivery mouth
1" 1/4
Pump body
Technopolymer
Impeller
Noryl
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
20
Max. flow rate (l./min.)
120
Min. head (m.)
2
Max. head (m.)
6.5
Jobs
drainage
drying up
Max. liquid temperature (°C)
+40°C
Height (cm)
25.7
Width (cm)
15.2
Weight (Kg)
5.1
Warranty (years)
2
Attachments

TOP-FLOOR technical sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo TOP-FLOOR series pumps.

Download (1.24MB)

TOP models and performances - FLOOR

TYPE
single phase
TOP 1 - FLOOR
TOP 2 - FLOOR
POWER
KWHP
0.250.33
0.370.50

Construction data of the TOP series

TOP pump cutaway
Bearings
Pump side motor bearing6201 ZZ
Opposite side engine bearing6201 ZZ
Tree holding
Type of sealDouble Seal: Mechanical and Lip with oil chamber
Engine side modelLip seal
LM diameter12
LM elastomerNBR
Shrinkage DN1=450 DN2=350STA-12R
LP diameter12
LP fixed ringCeramic
LP rotating ringGraphite
LP elastomerNBR
Materials
1.0 - Pump bodyReinforced technopolymer
2.2 - Suction coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterReinforced technopolymer