TOP 2 - LA - 0.50 HP Electric Drainage Pump for Aggressive Liquids
Flow rate up to 220 l/min (13.2 m³/h). Head up to 8 m. 0.37 kW (0.50 HP) motor. 10-meter cable with Schuko plug.
The TOP 2 - LA submersible electric pump from the TOP series by Pedrollo is recommended for domestic installations.
Emergency drainage of small flooded areas such as rooms, basements, and garages, disposal of used domestic water from dishwashers and washing machines, and emptying of sewer wells are recommended.
The TOP 2 - LA, thanks to the construction solutions employed by Pedrollo , guarantees ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
To ensure maximum hygiene, Pedrollo has made all components that come into contact with water from stainless steel.
The TOP 2 - LA is among the best in the submersible drainage category.
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 160
- Min. head (m.)
- 1
- Max. head (m.)
- 6
- Cable length (m.)
- 5
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 25.7
- Width (cm)
- 15.2
- Weight (Kg)
- 5.2
- Warranty (years)
- 2
Construction data of the TOP series

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |



