TOP 5 - GM - 1.25 HP Electric Drainage Pump for Clear Water
Flow rate up to 360 l/min (21.6 m³/h). Head up to 15.5 m. 0.92 Kw (1.25 HP) motor.
WITH MAGNETIC FLOAT.
The TOP 5 - GM submersible electric pump from the TOP series by Pedrollo is recommended for domestic installations.
Emergency drainage of small flooded areas such as rooms, basements, and garages is recommended, as is the disposal of used domestic water from dishwashers and washing machines, and the emptying of collection pits.
The TOP 5 - GM, thanks to the construction solutions employed by Pedrollo , guarantees ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
The magnetic float makes it perfect for installations in small wells.
Pedrollo used a mix of noryl, technopolymer and AISI 304 and 431 stainless steel for a solid and robust result.
The TOP 5 - GM is among the best in the submersible drainage category.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.90
- Power (HP)
- 1.25
- Absorption at 230V (A)
- 5.5
- Capacitor
- 20 µF 450 VL
- Delivery mouth
- 1" 1/2
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 360
- Min. head (m.)
- 2.5
- Max. head (m.)
- 15.5
- Cable length (m.)
- 10
- Jobs
- drainage
irrigation - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 33.7
- Width (cm)
- 20.4
- Weight (Kg)
- 11.4
- Warranty (years)
- 2
TOP models and performances - GM
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP 4

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |



