TOP 3 - GM (10m) - 0.75 HP clear water drainage pump
Flow rate up to 260 l/min (15.6 m³/h). Head up to 10.4 m. 0.55 kW (0.75 HP) motor. 10-meter cable with Schuko plug.
WITH MAGNETIC FLOAT.
The TOP 3 - GM submersible electric pump from the TOP series by Pedrollo is recommended for small-scale installations.
Equipped with a vertical sliding magnetic float for less space occupied during use.
Recommended for home installations.
Suitable for emergency drainage of small flooded areas such as rooms, basements, garages and for the disposal of used domestic water from dishwashers, washing machines and for emptying collection pits.
The TOP 3 - GM, thanks to the construction solutions employed by Pedrollo , guarantees ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
Complete with 5 meter power cable and float switch.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.2
- Capacitor
- 14 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 260
- Min. head (m.)
- 2
- Max. head (m.)
- 10.4
- Cable length (m.)
- 10
- Jobs
- drainage
drying up - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 29
- Width (cm)
- 15.2
- Weight (Kg)
- 6.9
- Warranty (years)
- 2
TOP models and performances - GM
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP series

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |



