TOP MULTI-EVOTECH 4 - Multi-impeller electric pump with 1 HP press control
Flow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. 0.75 Kw (1 HP) motor.
With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap.
The TOP MULTI-EVOTECH 4 multi-impeller electric pump by Pedrollo is recommended for domestic and civil use.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
A special feature of the TOP MULTI-EVOTECH 4 is the internal electrical device that starts the electric pump following a drop in system pressure below 2.5 bar and stops it when the flow drops below 3 litres per minute.
This device protects the pump from dry running and blocking, in fact after 48 hours of inactivity it starts the pump for 10 seconds.
The TOP MULTI-EVOTECH 4 is suitable for domestic water supply from relatively deep basins, tanks or wells, for taking rainwater from cisterns for hand watering or feeding an irrigation system.
The flow rate ranges from 10 to 80 liters per minute. The head ranges from 8 to 52 meters.
It must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +40.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 3.9
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 3
- Crankshaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 8
- Max. head (m.)
- 52
- Emptying level (mm)
- 35
- Cable length (m.)
- 10
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 47.6
- Width (cm)
- 23.9
- Depth (cm)
- 23.9
- Weight (Kg)
- 11.0
- Warranty (years)
- 2
TOP MULTI-EVOTECH 2-4 models and performances
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP MULTI-EVOTECH 2

Bearings
| Pump side motor bearing | 6202 ZZ - C3 |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-13R |
| LM diameter | 13 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R SG |
| LP diameter | 12 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 1.1 - Suction Body | Reinforced technopolymer |
| 1.3 - Delivery body | Reinforced technopolymer |
| 1.4 - Basic | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | POM acetal resin |
| 5.5 - Director Crown | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |



