-42%

TOP MULTI-TECH 4 - 1 HP multi-impeller electric pump with press control

Flow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. 0.75 Kw (1 HP) motor.

With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap.

€334.69 Tax included

274.34 Tax excluded

€577.06-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

TOP MULTI-TECH 4 - 1 HP multi-impeller electric pump with press control
  • Use dot instead of comma

Loading

Description

The TOP MULTI-TECH 4 multi-impeller electric pump by Pedrollo is recommended for domestic and civil use.

Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.

A special feature of the TOP MULTI-TECH 4 is the internal electrical device that starts the electric pump following a drop in system pressure below 2.5 bar and stops it when the flow drops below 3 litres per minute.

This device protects the pump from dry running and blocking, in fact after 48 hours of inactivity it starts the pump for 10 seconds.

The TOP MULTI-TECH 4 is suitable for domestic water supply from relatively deep basins, tanks or wells, for drawing rainwater from cisterns for hand watering or to feed an irrigation system.

The flow rate ranges from 10 to 80 liters per minute. The head ranges from 8 to 52 meters.

It must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +40.

Data sheet
Brand Pedrollo
Reference TOP MULTI-TECH 4
In stock 41 Items
MPN 48TPMA080A1U
Motor connection
SINGLE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
3.9
Delivery mouth
1" 1/4
Pump body
Technopolymer
Impeller
Noryl
Number of impellers
4
Crankshaft
AISI 431 stainless steel
Check valve
Yes
Degree of protection
IP 68
Minimum flow rate (l./min.)
10
Max. flow rate (l./min.)
80
Min. head (m.)
8
Max. head (m.)
52
Emptying level (mm)
35
Cable length (m.)
10
Jobs
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+40°C
Height (cm)
46.3
Width (cm)
17.8
Depth (cm)
17.8
Weight (Kg)
10.5
Warranty (years)
2
Attachments

Top Multi Tech data sheet

Models, performance curves and construction features of the Top Multi Tech PEDROLLO pumps.

Download (2.81MB)

Models and performances TOP MULTI-TECH 2-4

TYPE
single phase
TOP MULTI-TECH 2
POWER
KWHP
0.550.75

Construction data of the TOP MULTI-TECH

TOP-MULTITECH pump cross section
Bearings
Pump side motor bearing6202 ZZ - C3
Opposite side engine bearing6201 ZZ
Tree seal
Type of sealDouble Mechanical Seal in tandem with oil chamber
Engine side modelSTA-13R
LM diameter13
LM fixed ringCeramic
LM rotating ringGraphite
LM ElastomerNBR
Narrowing DN1=450 DN2=350STA-12R SG
LP diameter12
LP fixed ringSilicon Carbide
LP rotating ringGraphite
LP ElastomerNBR
Materials
1.0 - Pump BodyReinforced technopolymer
1.3 - Delivery BodyReinforced technopolymer
3.0 - ImpellerReinforced technopolymer
4.0 - Pump TreeStainless steel EN 1.4057 (AISI 431)
5.0 - Stadium boxReinforced technopolymer
5.1 - DiffuserReinforced technopolymer
5.2 - Shaving RingPOM Acetal Resin
5.5 - Crown DirectorReinforced technopolymer
6.0 - Engine carrierStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
8.0 - Intake Grille/FilterReinforced technopolymer