TOP MULTI-TECH 2 - 0.75 HP multi-impeller electric pump with pressure control
Flow rate up to 80 l/min (4.8 m³/h). Head up to 40 m. 0.55 Kw (0.75 HP) motor.
With integrated electronic device that allows you to start or stop the electric pump automatically, by opening or closing the tap.
The TOP MULTI-TECH 2 submersible electric pump from the TOP MULTI-TECH series by Pedrollo is automatic.
The integrated device allows you to start or stop the electric pump automatically by opening or closing the tap.
The device starts the electric pump in the event of a pressure drop and stops it when the flow drops below 3 liters per minute.
Protects the pump against dry running and blocking after long periods of inactivity.
Made of technopolymer, AISI 304 stainless steel and noryl for a solid and robust result.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.4
- Capacitor
- 12.5 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 3
- Crankshaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 6
- Max. head (m.)
- 40
- Emptying level (mm)
- 35
- Cable length (m.)
- 10
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 42.8
- Width (cm)
- 17.8
- Weight (Kg)
- 9.3
- Warranty (years)
- 2
Models and performances TOP MULTI-TECH 2-4
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP MULTI-TECH

Bearings
| Pump side motor bearing | 6202 ZZ - C3 |
| Opposite side engine bearing | 6201 ZZ |
Tree seal
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-13R |
| LM diameter | 13 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | STA-12R SG |
| LP diameter | 12 |
| LP fixed ring | Silicon Carbide |
| LP rotating ring | Graphite |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Reinforced technopolymer |
| 1.3 - Delivery Body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shaving Ring | POM Acetal Resin |
| 5.5 - Crown Director | Reinforced technopolymer |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Intake Grille/Filter | Reinforced technopolymer |



