TOP MULTI 2-EVO - 0.75 HP multi-impeller electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 40 m. 0.55 Kw (0.75 HP) motor.
The TOP MULTI 2-EVO submersible electric pump from the TOP MULTI-EVO series is recommended for domestic and civil installations.
Due to its high efficiency and reliability, it is suitable for domestic water supply from relatively deep tanks, reservoirs or wells, for drawing rainwater from cisterns for hand watering or for feeding an irrigation system.
It can be installed up to 10 meters below the water level. The monometric suction height is 7 meters.
Pedrollo has created TOP MULTI 2-EVO with technopolymer, noryl and AISI 304 and 431 stainless steel for a solid and robust final result.
Complete with 10 meter power cable, float switch, hose connector and sleeve.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.4
- Capacitor
- 12.5 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 3
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 6
- Max. head (m.)
- 40
- Emptying level (mm)
- 35
- Cable length (m.)
- 10
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 39.4
- Width (cm)
- 23.9
- Weight (Kg)
- 9.8
- Warranty (years)
- 2
Construction data of the TOP MULTI 2-3-4-5-EVO

Bearings
| Pump side motor bearing | 6201 ZZ - C3E |
| Opposite side engine bearing | 6201 ZZ - C3E |
Tree seal
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-13R |
| LM diameter | 13 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | STA-12R SG |
| LP diameter | 12 |
| LP fixed ring | Silicon Carbide |
| LP rotating ring | Graphite |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Reinforced technopolymer |
| 1.1 - Suction Body | Reinforced technopolymer |
| 1.3 - Delivery Body | Reinforced technopolymer |
| 1.4 - Base | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shaving Ring | POM Acetal Resin |
| 5.5 - Crown Director | Reinforced technopolymer |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
Models and performances TOP MULTI EVO-1-2-4
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



