TOP MULTI 2 - 0.75 HP multi-impeller electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 40 m. 0.55 Kw (0.75 HP) motor.
The TOP MULTI 2 submersible electric pump from Pedrollo 's TOP MULTI series stands out for its reliability and performance.
Recommended for civil and domestic installations.
Due to its high efficiency and reliability, it is suitable for domestic water supply from relatively deep tanks, reservoirs or wells, for drawing rainwater from cisterns for hand watering or for feeding an irrigation system.
The TOP MULTI 2 can be installed up to 10 metres below water level.
Complete with 10-meter power cable, float switch, anti-vibration feet, hose connector and sleeve with flap valve.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.4
- Capacitor
- 12.5 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 3
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 6
- Max. head (m.)
- 40
- Emptying level (mm)
- 35
- Cable length (m.)
- 10
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 38
- Width (cm)
- 17.8
- Weight (Kg)
- 9.2
- Warranty (years)
- 2
Models and performances TOP MULTI 1-2-4
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP MULTI 2

Bearings
| Pump side motor bearing | 6202 ZZ - C3 |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-13R |
| LM diameter | 13 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R SG |
| LP diameter | 12 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 1.3 - Delivery body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | POM acetal resin |
| 5.5 - Director Crown | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |



