TOP MULTI 1 - 0.50 HP submersible electric pump
Flow rate up to 70 l/min (4.2 m³/h). Head up to 26 m. 0.37 kW (0.50 HP) motor.
The TOP MULTI 1 submersible electric pump from the TOP MULTI series by Pedrollo can pump clean water or chemically non-aggressive liquids for components.
Recommended for civil and domestic installations.
Due to its high efficiency and reliability, it is suitable for domestic water supply from relatively deep tanks, reservoirs or wells, for drawing rainwater from cisterns for hand watering or for feeding an irrigation system.
The TOP MULTI 1 comes complete with a 10-metre power cable, float switch, anti-vibration feet, hose connector and sleeve with flap valve.
Pedrollo used technopolymer, noryl and AISI 304 and 431 stainless steel for a solid and robust construction result.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 2
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 75
- Min. head (m.)
- 6
- Max. head (m.)
- 26
- Emptying level (mm)
- 25
- Cable length (m.)
- 10
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 29.5
- Width (cm)
- 17
- Weight (Kg)
- 6.8
- Warranty (years)
- 2
Models and performances TOP MULTI 1-2-4
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP MULTI 1

Bearings
| Pump side motor bearing | 6201 ZZ - C3E |
| Opposite side engine bearing | 6201 ZZ - C3E |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | POM acetal resin |
| 5.4 - Stadium Containment | Reinforced technopolymer |
| 5.5 - Director Crown | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |



