6SR44/20 - HYD - 1000 litre submersible pump
HYDRAULIC PART. WITHOUT MOTOR.
Flow rate up to 1000 l/min (60 m³/h). Head up to 248 metres.
The Pedrollo 6SR 44/20 HYD pump consists of only the impeller part, without the motor.
The 6SR 44/20 HYD can be mounted on any 30 HP engine.
The Pedrollo 6SR 44/20-HYD pump body is the original spare part for the pump body part of the 4SR 44/20 S with 6PD or 6PSR engine.
The 6PD engine is developed with the oil bath technique and can be installed up to 200 meters underwater while the 6PSR engine is developed with the water bath technique and can be installed up to 150 meters underwater.
Pedrollo 6SR submersible pumps offer the possibility of being disassembled into 2: pump body and motor, thus offering the possibility of replacing the damaged part without replacing the entire pump.
The 6SR 44/20-HYD pump body is made mainly of AISI 304 stainless steel which provides greater resistance, robustness and above all allows it to last over time.
The Pedrollo 6SR44/20 has a flow rate that varies from 200 to 1000 litres per minute with a head from 39 to 248 metres.
Due to its high performance and reliability, it is suitable for use in the civil, industrial and agricultural fields, for the distribution of water in conjunction with pressure tanks, for irrigation, for washing systems, for pressure raising or for fire-fighting systems.
The pump body is approximately 233.5 centimeters long.
- Power (HP)
- 30
- Delivery mouth
- 3"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 20
- Pump shaft
- AISI 304 stainless steel
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1000
- Min. head (m.)
- 39
- Max. head (m.)
- 248
- Height (cm)
- 233.5
- External diameter (cm)
- 14.95
- Warranty (years)
- 2



