SKR 1.1 - 1.5 HP three-phase self-priming electric pump
Flow rate up to 250 l/min (18 m³/h). Head up to 24.5 m. 1.1 kW (1.5 HP) motor.
The Pedrollo SKR 1.1 self-priming electric pump is recommended for domestic and civil use.
This electric pump is designed to suck water even in the presence of air mixed with the pumped liquid.
Pedrollo recommends this pump for water and chemically non-aggressive liquids due to the materials from which the pump is made.
The SKR 1.1 can be used for irrigating vegetable gardens and gardens.
It has a flow rate that varies from 50 to 250 litres per minute with a head from 11 to 24.5 metres.
The suction capacity of the SKR 1.1 is up to 9 metres.
It must be powered by a three-phase voltage, has a horsepower of 1.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.0
- Current consumption at 400V (A)
- 2.9
- Pump body
- Cast iron
- Crankshaft
- AISI 431 stainless steel
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 11
- Max. head (m.)
- 24.5
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 24.1
- Width (cm)
- 22.3
- Depth (cm)
- 46.5
- Weight (Kg)
- 24.5
SKR Models and Performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||
SKR construction data

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |



