RXm 5/40 - GM - 1.5 HP single-phase VORTEX electric pump for dirty water
Flow rate up to 380 l/min (22.8 m³/h). Head up to 12.8 m. 1.1 Kw (1.5 HP) motor.
WITH MAGNETIC FLOAT
The RXm 5/40 - GM submersible electric pump from the RX-VORTEX series by Pedrollo allows the passage of solids up to 40 millimetres.
Suitable for draining dirty water containing suspended solids.
Recommended for civil and domestic installations.
The construction solutions used by Pedrollo for the RXm 5/40 - GM guarantee operational safety, even in case of continuous use, thanks to the total cooling of the engine.
Made entirely of stainless steel for a premium and long-lasting result.
Complete with vertical sliding magnetic float for installation in small wells.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 6.5
- Capacitor
- 25 µF 450 VL
- Delivery mouth
- 1" 1/2
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 380
- Min. head (m.)
- 2
- Max. head (m.)
- 12.8
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 43.3
- Width (cm)
- 21.5
- Weight (Kg)
- 16.3
- Warranty (years)
- 2
Models and performances RXm - VORTEX - GM
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
Construction data of the RX 4/40 series

Bearings
| Pump side motor bearing | 6203 ZZ - C3E |
| Opposite side engine bearing | 6203 ZZ - C3E |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



