RXm 4 - GM - 1 HP single-phase electric pump for clear water
Flow rate up to 270 l/min (15.6 m³/h). Head up to 16 m. 0.75 Kw (1 HP) motor.
WITH MAGNETIC FLOAT
The RXm 4 - GM submersible electric pump from the RX series by Pedrollo is recommended for civil and domestic installations.
Suitable for fixed installations, emergency drainage of small flooded areas, disposal of domestic waste water from dishwashers and washing machines, emptying collection pits.
The RXm 4 - GM submersible electric pump is simple and reliable.
The construction solutions employed guarantee operational safety thanks to the total cooling of the motor and the double seal on the shaft.
Made entirely of stainless steel for a solid and robust result and to last over time.
With vertical sliding magnetic float for awkward installations in small wells.
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 1
- Absorption at 230V (A)
- 5.9
- Capacitor
- 20 µF 450 VL
- Delivery mouth
- 1" 1/2
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 270
- Min. head (m.)
- 4.2
- Max. head (m.)
- 16
- Cable length (m.)
- 10
- Jobs
- drainage
drying up - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 37
- Width (cm)
- 22
- Weight (Kg)
- 16.7
- Warranty (years)
- 2
RXm models and performances - GM
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the RX4

Bearings
| Pump side motor bearing | 6203 ZZ - C3E |
| Opposite side engine bearing | 6203 ZZ - C3E |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



