-42%

RX 2 (10m) - 0.50 HP three-phase clear water pump

Flow rate up to 190 l/min (13.2 m³/h). Head up to 9.5 m. 10.3 kW (0.50 HP) motor. 10 m cable.

€220.06 Tax included

180.38 Tax excluded

€379.42-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

RX 2 (10m) - 0.50 HP three-phase clear water pump
  • Use dot instead of comma

Loading

Description

The RX 2 submersible electric pump from the RX series by Pedrollo is suitable for draining clear water.

Allows the passage of solid bodies up to 10 millimetres in diameter.

The construction solutions used for the RX 2 guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.

It can be installed up to 10 meters below water level with a cable of adequate length, the one supplied is 10 meters.

The construction is solid and robust thanks to Pedrollo 's use of stainless steel.

Data sheet
Brand Pedrollo
Reference RX 2 10MT
In stock 10 Items
Motor connection
THREE-PHASE
Power (Kw)
0.37
Power (HP)
0.50
Current consumption at 400V (A)
1
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
AISI 304 stainless steel
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
20
Max. flow rate (l./min.)
190
Min. head (m.)
2.8
Max. head (m.)
10.3
Cable length (m.)
10
Jobs
drainage
drying up
Max. liquid temperature (°C)
+40°C
Height (cm)
26.9
Width (cm)
14.7
Weight (Kg)
5.6
Warranty (years)
2
Attachments

RX data sheet

Models, performance curves and construction features of the Pedrollo RX series pumps.

Download (2.5MB)

RX models and performance

GUY
Three-phase
RX 1
RX 2
RX 3
RX 4
RX 5
POWER
KWHP
0.250.33
0.370.50
0.550.75
0.751
1.11.5

Construction data of the RX1

Cutaway of RX pumps
Bearings
Pump side motor bearing6201 ZZ
Opposite side engine bearing6201 ZZ
Tree holding
Type of sealDouble Seal: Mechanical and Lip with oil chamber
Engine side modelLip seal
LM diameter12
LM elastomerNBR
Shrinkage DN1=450 DN2=350STA-12R
LP diameter12
LP fixed ringCeramic
LP rotating ringGraphite
LP elastomerNBR
Materials
1.0 - Pump bodyStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserStainless steel EN 1.4301 (AISI 304)
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverReinforced technopolymer
7.0 - LanternStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)