PV 65 - 0.75 HP three-phase peripheral impeller electric pump
Flow rate up to 40 l/min (2.4 m³/h). Head up to 58 m. 0.55 Kw (0.75 HP) motor.
Description
The Pedrollo PV 65 electric pump can pump clean water without abrasive particles and liquids that are not aggressive towards the pump materials.
Recommended for use in the industrial sector, particularly for cooling and air conditioning activities.
The flow rate ranges from 2 to 40 litres and the head from 7 to 58 litres.
Made from materials such as brass, aluminium and stainless steel, the pump is particularly robust and durable.
The use of brass for the PV 65 guarantees against the formation of rust and oxidation.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 2.6
- Current consumption at 400V (A)
- 1.5
- Suction mouth
- 1/2"
- Delivery mouth
- 1/2"
- Pump body
- Brass
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 2
- Max. flow rate (l./min.)
- 40
- Min. head (m.)
- 7
- Max. head (m.)
- 58
- Jobs
- air conditioning systems
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 15.2
- Width (cm)
- 24.35
- Depth (cm)
- 12.0
- Weight (Kg)
- 6.8
- Warranty (years)
- 2
Models and PV performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PV 55-60-81-65

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | ST1-12 |
| LP diameter | 12 |
| Fixed ring LP | Silicon carbide |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Brass CW617N EN 12165 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | DX53D EN 10346 galvanized steel |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
