-42%

PQA 90 - 1 HP three-phase peripheral impeller electric pump

Flow rate up to 38 l/min (2.28 m³/h). Head up to 92 m. 0.75 Kw (1 HP) motor.

€275.26 Tax included

225.62 Tax excluded

€474.58-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PQA 90 - 1 HP three-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo PQA 90 electric pump is solid and robust.

Pedrollo used materials such as brass, cast iron, aluminum, and stainless steel, which provide strength and durability.

Recommended for pumping clean water without abrasive particles and liquids that are not aggressive towards the constituent materials.

The PQAm 70 is constructed of PPS with a brass front cover which offers a guarantee against rust formation and oxidation.

It has a flow rate ranging from 2 to 38 litres per minute and a head ranging from 6 to 92 metres.

Data sheet
Brand Pedrollo
Reference PQA 90
In stock 10 Items
MPN 41PQAT9PA
Motor connection
THREE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
4.2
Current consumption at 400V (A)
2.4
Suction mouth
1/2"
Delivery mouth
1/2"
Pump body
PPS
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 55
Minimum flow rate (l./min.)
2
Max. flow rate (l./min.)
38
Min. head (m.)
6
Max. head (m.)
92
Jobs
cooling systems
Max. liquid temperature (°C)
+90°C
Motor voltage
400 V
Height (cm)
17.9
Width (cm)
26.0
Depth (cm)
13.4
Weight (Kg)
9.4
Warranty (years)
2
Attachments

PQA data sheet

Construction and operating characteristics. Work curves and use limits of Pedrollo PQA series pumps.

Download (276.87KB)

PQA models and performance

TYPE
three phase
PQA 50
PQA 60
PQA 70
PQA 72
PQA 90
POWER
KWHP
0.180.25
0.370.50
0.550.75
0.550.75
0.751

Construction data of the PQA 72-90

Pedrollo PQA pump section
Bearings
Pump side motor bearing 6203 ZZ
Opposite side motor bearing 6203 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Reinforced technopolymer
2.0 - Cover Brass CW617N EN 12165
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover Aluminum EN-AB 46100
7.0 - Lantern Aluminum EN-AB 46100