PQAm 70 - 0.75 HP single-phase electric pump with peripheral impeller
Flow rate up to 45 l/min (2.7 m³/h). Head up to 68 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo PQAm 70 electric pump is solid and robust.
Pedrollo used materials such as brass, cast iron, aluminum, and stainless steel, which provide strength and durability.
Recommended for pumping clean water without abrasive particles and liquids that are not aggressive towards the constituent materials.
The PQAm 70 is constructed of PPS with a brass front cover which offers a guarantee against rust formation and oxidation.
It has a flow rate ranging from 2 to 45 litres per minute and a head ranging from 6 to 92 metres.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 6.2
- Capacitor
- 16 µF 450 VL
- Suction mouth
- 1/2"
- Delivery mouth
- 1/2"
- Pump body
- PPS
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 2
- Max. flow rate (l./min.)
- 45
- Min. head (m.)
- 10
- Max. head (m.)
- 68
- Jobs
- cooling systems
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 17.9
- Width (cm)
- 26.1
- Depth (cm)
- 13.4
- Weight (Kg)
- 9.3
- Warranty (years)
- 2
PQAm models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PQA 70

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | ST1-12 |
| LP diameter | 12 |
| Fixed ring LP | Silicon carbide |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Reinforced technopolymer |
| 2.0 - Cover | Brass CW617N EN 12165 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



