-42%

PQA 60 - 0.40 HP three-phase peripheral impeller electric pump

Flow rate up to 32 l/min (1.92 m³/h). Head up to 40.5 m. 0.30 Kw (0.40 HP) motor.

€168.41 Tax included

138.04 Tax excluded

€290.36-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PQA 60 - 0.40 HP three-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo PQA 60 electric pump is recommended for use in the industrial sector.

It can be used for cooling, air conditioning and ironing systems.

It has a flow rate ranging from 2 to 32 litres per minute and a head ranging from 5 to 40.5 metres.

Pedrollo has created the PQA 60 in PPS with a brass front cover on the impeller to prevent the formation of rust and oxidation.

Data sheet
Brand Pedrollo
Reference PQA 60
In stock 8 Items
MPN 41PNQA6PA
Motor connection
THREE-PHASE
Power (Kw)
0.30
Power (HP)
0.40
Suction mouth
1/2"
Delivery mouth
1/2"
Pump body
PPS
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 44
Minimum flow rate (l./min.)
2
Max. flow rate (l./min.)
32
Min. head (m.)
5
Max. head (m.)
40.5
Jobs
cooling systems
Max. liquid temperature (°C)
+90°C
Motor voltage
400 V
Height (cm)
14.5
Width (cm)
19.8
Depth (cm)
11.6
Weight (Kg)
4.7
Warranty (years)
2
Attachments

PQA data sheet

Construction and operating characteristics. Work curves and use limits of Pedrollo PQA series pumps.

Download (276.87KB)

PQA models and performance

TYPE
three phase
PQA 50
PQA 60
PQA 70
PQA 72
PQA 90
POWER
KWHP
0.180.25
0.370.50
0.550.75
0.550.75
0.751

Construction data of the PQA 50-60

Section of the Pedrollo PQA pump
Bearings
Pump side motor bearing 6201 ZZ
Opposite side motor bearing 6201 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Reinforced technopolymer
2.0 - Cover Brass CW617N EN 12165
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover DX53D EN 10346 galvanized steel
7.0 - Lantern Aluminum EN-AB 46100