-42%

PQAm 60 - 0.40 HP single-phase electric pump with peripheral impeller

Flow rate up to 32 l/min (1.92 m³/h). Head up to 40.5 m. 0.30 Kw (0.40 HP) motor.

€153.55 Tax included

125.86 Tax excluded

€264.74-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PQAm 60 - 0.40 HP single-phase electric pump with peripheral impeller
  • Use dot instead of comma

Loading

Description

The Pedrollo PQAm 60 electric pump has a peripheral impeller and a PPS pump body.

Pedrollo built this pump in PPS with a brass impeller front cover; these materials are a guarantee against the formation of rust.

The PQAm 60 is recommended for use in the industrial sector, for example in cooling, air conditioning and ironing systems.

It has a flow rate ranging from 2 to 32 litres per minute and a head ranging from 5 to 40.5 metres.

Data sheet
Brand Pedrollo
Reference PQAm 60
In stock 12 Items
MPN 41PNQA6PA1
Motor connection
SINGLE-PHASE
Power (Kw)
0.30
Power (HP)
0.40
Absorption at 230V (A)
2.5
Capacitor
10 µF 450 VL
Suction mouth
1/2"
Delivery mouth
1/2"
Pump body
PPS
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 44
Minimum flow rate (l./min.)
2
Max. flow rate (l./min.)
32
Min. head (m.)
5
Max. head (m.)
40.5
Jobs
cooling systems
Max. liquid temperature (°C)
+90°C
Motor voltage
230 V
Height (cm)
14.5
Width (cm)
19.8
Depth (cm)
11.6
Weight (Kg)
4.7
Warranty (years)
2
Attachments

PQA data sheet

Construction and operating characteristics. Work curves and use limits of Pedrollo PQA series pumps.

Download (276.87KB)

PQAm models and performance

TYPE
single phase
PQAm 50
PQAm 60
PQAm 70
PQAm 72
PQAm 90
POWER
KWHP
0.180.25
0.370.50
0.550.75
0.550.75
0.751
PERFORMANCES
Q
liters/min
H
meters
2 ÷ 2840 ÷ 5
2 ÷ 3240 ÷ 5
2 ÷ 4565 ÷ 8
2 ÷ 5065 ÷ 12
2 ÷ 3890 ÷ 5
MOUTH
asp.send.
1/2"1/2"
1"1"
1/2"1/2"

Construction data of the PQA 50-60

Section of the Pedrollo PQA pump
Bearings
Pump side motor bearing 6201 ZZ
Opposite side motor bearing 6201 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Reinforced technopolymer
2.0 - Cover Brass CW617N EN 12165
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover DX53D EN 10346 galvanized steel
7.0 - Lantern Aluminum EN-AB 46100