-42%

PQm 81-Bs - 0.75 HP single-phase peripheral impeller electric pump

Flow rate up to 20 l/min (1.2 m³/h). Head up to 95 m. 0.55 Kw (0.75 HP) motor.

€252.61 Tax included

207.06 Tax excluded

€435.54-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PQm 81-Bs - 0.75 HP single-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo PQm 81-Bs electric pump is an update of the PQ series and is recommended for industrial use.

A unique feature of this pump is the construction of the pump body which in this case is made of brass.

This pump differs from the PQ series, in that the PQ series is for domestic use and the pump body of that series is made of steel.

The use of CW617N brass guarantees against the formation of rust and oxidation, which consequently allows the pump to last over time.

Thanks to its hydraulic characteristics, small size and compactness, the PQm 81-Bs allows for industrial use in very restricted areas in chillers, air conditioning, cooling or boiler power equipment.

Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.

The flow rate ranges from 2 to 20 liters per minute. The head ranges from 10 to 95 meters.

The PQm 81-Bs must be powered by a single-phase voltage, has a horsepower of 0.75 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.

Data sheet
Brand Pedrollo
Reference PQm 81-Bs
In stock 9 Items
EAN13 0662425080403
MPN 41PQ88YA1
Motor connection
SINGLE-PHASE
Power (Kw)
0.55
Power (HP)
0.75
Absorption at 230V (A)
3.7
Capacitor
12.5 µF 450 VL
Suction mouth
1/2"
Delivery mouth
1/2"
Pump body
Brass
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 44
Minimum flow rate (l./min.)
2
Max. flow rate (l./min.)
20
Min. head (m.)
10
Max. head (m.)
95
Jobs
water supply
Max. liquid temperature (°C)
90
90
Motor voltage
230 V
Height (cm)
15.5
Width (cm)
22.4
Depth (cm)
11.9
Weight (Kg)
6.2
Warranty (years)
2
Attachments

PQ-BS Technical Data Sheet

Construction and operating characteristics. Operating curves, operating limits, and dimensions of Pedrollo's PQ-BS series pumps.

Download (444.21KB)

PQm-Bs models and performance

GUY
single phase
PQm 60-Bs
PQm 65-Bs
PQm 81-Bs
POWER
KWHP
0.370.50
0.550.75
0.550.75

Construction data of the PQ 60-65-81-BS

Section of the Pedrollo PQ-BS pump
Bearings
Pump side motor bearing 6201 ZZ
Opposite side motor bearing 6201 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Brass CW617N EN 12165
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover DX53D EN 10346 galvanized steel
7.0 - Lantern Aluminum EN-AB 46100