PQm 60-Bs - Single-phase peripheral impeller electric pump 0.40 HP
Flow rate up to 40 l/min (2.4 m³/h). Head up to 45.5 m. 0.30 Kw (0.40 HP) motor.
The Pedrollo PQm 60-Bs electric pump is recommended for industrial use, unlike the PQ series which is recommended for domestic use.
Another feature that distinguishes it from the PQ series is the pump body made of brass.
The use of CW617N brass guarantees against the formation of rust and oxidation, which consequently guarantees a long life of the pump.
Thanks to its hydraulic characteristics, compactness and small size, the PQm 60-Bs allows for industrial use in chillers, air conditioning, cooling or boiler power equipment.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The flow rate ranges from 2 to 40 liters per minute. The head ranges from 5 to 45.5 meters.
The PQm 60-Bs must be powered by a single-phase voltage, has a horsepower of 0.4 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.30
- Power (HP)
- 0.40
- Absorption at 230V (A)
- 2.6
- Capacitor
- 10 µF 450 VL
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- Brass
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 2
- Max. flow rate (l./min.)
- 40
- Min. head (m.)
- 5
- Max. head (m.)
- 45.5
- Jobs
- water supply
- Max. liquid temperature (°C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 14.5
- Width (cm)
- 19.2
- Depth (cm)
- 11.6
- Weight (Kg)
- 5
- Warranty (years)
- 2
PQm-Bs models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PQ 60-65-81-BS

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | ST1-12 |
| LP diameter | 12 |
| Fixed ring LP | Silicon carbide |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Brass CW617N EN 12165 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | DX53D EN 10346 galvanized steel |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



